Using Pile Driving Equipment to its Maximum Potential

As per the Global Construction 2030 report, the construction industry worldwide is expected to go up to USD 15.5 trillion by 2030. Also, 57% of this growth is contributed by the USA and two other countries. Thus, the rise in construction activities in the future anticipates the rise in the demand for the products and resultant pile driving equipment market size too. As per the reports, it is huge globally. It was valued at USD 5.08 billion in 2020 and is forecasted to grow at a CAGR of 3.6% from 2021 to 2028.

A foundation is required to support the heavy structure to stand and also for the load to be transferred from that structure. The pile foundation serves this purpose. They are columnar or cylindrical structures made of concrete, metal, or steel and these piles are dug into the soil with the help of pile driving equipment machines and techniques associated with the same.

This article discusses the dedicated uses of the specific pile driving equipment and the remedies for how to make the best use of these machines by solving the most common issues with pile driving.

Optimising Pile Driving Equipment

A foundation using pile driving equipment is a cost-effective type of foundation. It is suitable in some specific conditions such as when there are poor soil conditions or compressible soil in the shallow depth. 

Also, it is adopted when the area is near the water body, canal, or deep drainage and it is possible to affect the soil. Further, if there are varying loads from heavy structures, or in the case of high groundwater tables or when the foundation trenches cannot be kept dry - this type of foundation is used.

Types and dedicated uses

As per the soil conditions and the required depth of the piles you need to optimise various types of pile driving equipment. The below points discuss different pile driving equipment and the specific areas in which they are used:

• To drill the pile and to support the hammer, the piling rigs are attached to the crane. Rigs have the tabular substance or the hard box and can be used in different foundations and purposes. Multiple piles can be put in place by just rotating the base machine and placing the leaders of the rigs. Thus, you need not move the whole equipment.

• As per the size and weight of the piles, you need to make the choice of the piling hammers. Other factors that contribute to the selection are the space on the construction site, cranes, energy efficiency, etc. There are different types of sheet pile hammers discussed below, you need to choose the ideal one depending upon the type of application. The professional pile driving equipment rental can help you with the right one as per your construction project. 

• Hydraulic impact pile hammers offer adjustable stroke, ram weights, and blow-rates to drive different types of piles such as sheet piles, timber piles, etc. This type of sheet hammer can be used optimally for various pile driving operations by placing them in any kind of rig. 

• Vibratory pile hammers use vertical vibrations to drive the sheet piles or pipes. The vibration mechanism and the weight of the hammer drive them into the ground.

• Other types of piling hammers include drop hammers to place the test piles and single-acting steam for piling in the marine environment. Also, the double-acting hammer is used for rapid blows and pile extraction by breaking rocks. Whereas the diesel pile hammers are used for soft soil conditions.

Apart from the above types of equipment, there are other miscellaneous ones such as winches, pile extractors, jetting equipment, pile frames, etc.

Resolving Issues to make the best use of pile driving equipment

To make the best use of the pile driving equipment systems with optimal changes includes various situations such as misalignment of the piles, movement in previously driven piles with the new ones, dislocating piles, etc. Some of the major ones are as follows:

You need to ensure the perfect driving system and the drivability of the pile that matches the soil conditions for the right number of blows. Their conditions need to meet the requirements for the predicted number of blows depending upon the depth.

Another aspect to consider is the soil resistance, drive system performance, and striking capacity. This is when the piles are driving deeper than the estimation and in such conditions, the restrike capacity needs to be tested.

Soil conditions and internal inspections of the piles are required in case the blow counts come down or change. Also, if there is only a slight change then you may consider the lower capacity in re-strike testing and hammer performance.

HPSI - For the best quality pile driving equipment rentals in Missouri

Hydraulic Power Systems Inc (HPSI) offers custom-made foundation construction equipment and is the leading supplier for the same. We are based in Missouri but serve global clients for any type of requirements such as hydraulic and vibratory pile hammers, impact pile hammers, hydraulic augers, and other foundation construction equipment.

Get your custom requirements met at competitive pricing with us. Also, make the best use of our experience and expertise to get the finest services around the ideal pile driving equipment rental. Call us on 816.221.4774 and visit our website

Read More:- Choose the right Vibratory Hammer for Your Construction Project

Improving the mainstream construction with the right Hydraulic Auger

After a turbulent duration of the Covid-19 pandemic, 2022 will be a year of revival and growth in the construction industry. The rising construction costs and labour shortages are challenging the industry to innovate competitive new ideas and make the construction process swifter. 

Further, the pandemic has changed the business style of the construction industry - from scheduling and finishing projects to hiring workers and meeting with clients. New technology persists to change the construction site, improve the ability to complete the projects, and increase profit margins. Fortunately, innovations of various robust pile driving equipment are changing the roles of industry professionals and frontline workers. 

At Hydraulic Power Systems Inc., the future of construction is always on our minds. Take a look with us at the latest trend that promises to push the boundaries of construction and take the mind-boggling mainstream. 

Hydraulic Augers - The Must-Have Construction Equipment

To commence any construction project, digging a hole in the ground is the first and foremost step. Previously, labourers used to dig the holes manually which lead to issues like:

• Chances of injury

• Not able to dig in every soil

• More investment in manpower

• Not so efficient digging

• Difficulty in the underwater digging process

To help the workers dig holes efficiently, drill machines were used. However, it cannot be used in every form of ground and has a high level of percussion. Nevertheless, with advancements in the construction industry, companies have found an alternative to manual digging and drillers - A Hydraulic Auger!

A hydraulic auger is drilling equipment that uses fluid pressure to operate. It is used widely for construction and digging applications such as excavations, shaft sinking, and road work. This drill bit-looking piece of equipment specialises in quickly and efficiently digging holes, as opposed to boring holes with a pile driver.

Benefits of using Hydraulic Augers

Using hydraulic augers for any construction project is always beneficial as:

• Using a hydraulic auger is easy 

• It digs holes quickly and thus, saves time. This equipment can dig holes in minutes that can take workers hours of hard work

• It helps workers as they don’t have to manually dig the holes. 

• Hydraulic augers can be used for a variety of projects from mining to underwater operations

• These augers usually have larger diameter shafts than other drills which means the same tool can be used to drill deeper holes

• It has a quicker penetration into any soil/ground material such as soft or hard soil, concrete or asphalt

While there are many various models of hydraulic augers, their core functionalities are similar. The digging capacities make them a staple on just about any construction site. Further, their high cost makes renting the most cost-effective option for many construction companies.

Hydraulic Power Systems Inc. - Providing Robust Hydraulic Augers for Your Worksite

At Hydraulic Power Systems, Inc., we strive to provide powerful pile driving equipment to all our clients. We make sure that you have the right equipment for your job. When you choose us for hydraulic augers rentals, you get the following advantage:

• Save money on warehousing and maintenance by renting
• Get customised equipment that meets your projects need
  
• Competitive prices so you can stay competitive as well

After a tepid period, an upswing in the construction industry is expected throughout 2022 as the U.S. economy recovers from the pandemic and grows. As your company strives for more profits and efficiency, keep up with the demand for the latest pile driving equipment for sale with the reliable rental equipment network of Hydraulic Power Systems, Inc.
On the whole, we’re ready to provide you with everything you need for your construction project. Call the experts of Hydraulic Power Systems, Inc. today at 816.221.4774 or visit the website - https://hydraulicpowersystems.com/

Read More:- Using Pile Driving Equipment to its Maximum Potential

How can you use a Hydraulic Auger in Winter?

Construction work in the winters can become challenging due to various reasons such as frozen concrete and ground. However, the latest technology has provided the advanced equipment, tools, and technique that can help carry out the most difficult type of construction jobs efficiently. The hydraulic power system is one such innovation used in electrical and mechanical construction equipment of various kinds. They are highly useful in tasks that need heavy force and a steady torque for lifting, crushing, moving, or drilling the materials.

If you are looking for an effective and easy method to drill holes, then hydraulic augers are the best. This article specifically discusses the guide to use this essential construction machine for winters. Also, know the best hydraulic augers rentals in Missouri to get the highest quality machines for your project.

The basics of Hydraulic Auger

A hydraulic auger is a piece of heavy construction machinery that is used for drilling purposes. It uses the hydraulic pressure for the power to drill the deep holes in any type of ground including solid rock, soil, concrete, or frozen.  

It does not handle only the force but also allows the drilling at various speeds that can be altered as per the requirement. It also enables the reversible direction of rotating for the drilling. 

It comprises a drive that will enable the application of hydraulic power to the drilling part of the equipment. It is further equipped with a helical screw blade called flighting that helps in boring the surface and directing the removed material. The sturdy drilling part of the augers is called the bit.

There are various types of augers based on the type of digging work to be done. Also, they are often used as an attachment to a heavy construction machine, a tractor, etc.

The guide to digging the grounds in winters with Hydraulic Auger

The overall status of winter grounds for construction jobs

The frozen ground can be more challenging than the hard frozen concrete. However, this applies to the surface with the permafrost crust only. This frozen surface depth is also called the frost line. The soil is warm deeper and not frozen, in fact, it holds an average temperature. 

With the further onset of the winters, the depth may increase, however, the digging will meet the soft soil eventually. The National Weather Service’s frost depth reports provide the estimated depth measurements of the frozen soil in terms of inches. The frost line gets deeper with the onset of winter, so it is beneficial to carry out the job as early as possible.

Using the right equipment for the desired job does wonders. This includes hydraulic power systems such as hydraulic hammers, hydraulic rippers, hydraulic augers, etc.

Challenges and Solutions for the frozen ground digging

It is the truth that breaking the frozen layer is tough. The soil auger bit can cut through the ice and dig through several inches. However, the other types of tools that have the best application suitable for breaking through the ice should be utilised. 

This makes the job speedy and efficient up to the frost line. These other tools include the ice drill bit, ice augers, post hole auger, and the heavy force with the jackhammer or pickax.

You need to remember that the ice bit is unable to function well in the soil. Also, the soil bit does not work effectively for the frozen ground. They may stop running due to the overload. The bit can break itself and the receiver too. 

Also, the dug soil turns back frozen, so you must finish the job with a specific hole all at once to avoid breaking the ice all over again.

HPSI - The leading hydraulic augers rentals in Missouri

To make the winter construction job highly efficient, you must choose the correct machinery and tools for the winter-specific application. Hydraulic Power Systems Inc (HPSI) provides excellent designing, manufacturing, and rental services for the leading quality of various hydraulic systems. We offer custom-made equipment as per your functional requirements. Also, we provide our services at a global level at any location.

HPSI’s product range includes various types of augers, vibratory drivers, hammers, extractors, dampeners, winching, and other foundation construction equipment. Also, our products and services are at highly competitive rates and continuously upgrading. Further, we have an experienced and skilled team to provide their specialised services around the technical grounds and applications.

If you are looking to buy or rent hydraulic augers, we are the leading supplier and rentals in Missouri. Get in touch today and discuss your requirements. Call us on 816.221.4774 or visit our website to know more about us - https://hydraulicpowersystems.com/

Read More:- The use of different types of Pile Driving Hammer

All you need to know about different types of Hydraulic Augers

Hydraulic Augers are tireless workers that help in the quick and efficient digging of holes. It is an indispensable attachment that is required in almost every construction and mining project. 

For Hydraulic Auger Rentals in Missouri, no product performs better than Hydraulic Power Systems industrial Hydraulic Augers. Our all models deliver efficient and reliable operation plus fast line speeds. 

Explore our range of Hydraulic Augers

We know that every project is different and so is the requirement of a Hydraulic Auger. This is why we at Hydraulic Power Systems offer various Hydraulic Augers with different dimensions, hose bundles and power packs!

Model 1: H-15

Model H-15 of our Hydraulic Auger has an output of 15,000 Ft.-lbs Torque. The power pack has CAT 210 HP Diesel Engine with electric start and automatic shutdowns. Its dimensions include - Width 42”, Length 96”, Height 82” and Weight 5,500 lbs.

It has remote air controls on the engine throttle & operating valve. The pump is rated at 125 GPM and has a maximum operating pressure of 2,300 PSI with a 155 Gal. reservoir, 20-micron return line filter and a radiator-mounted oil cooler of 55. Gal. fuel capacity.

Model 2: H35/50VT

Model H35/50VTs torque is infinitely variable from 15,000 to 35,000 ft. lbs., while the speed is variable from 30 to 115 RPM. This model has a kevlar-sleeved hose bundle along with a hollow through-shaft for pumping water or grout.

The power packs have a CAT diesel engine rated at 335 HP, 150 Gal. reservoir, engine mounted oil cooler, and 20 Micron Filtration. It also has standard Hydraulic Remote Controls. Further, its maximum operating pressure is 5,000 PSI at 86 GPM.

Model 3: H50/70VT

Model H50/70VT has infinitely variable speed and torque (15,000-50,000 ft. lbs). It can be adapted to run in U-Styleleads and also be sled in front of leads. With an operating pressure of 5,000 psi, it has a rotation speed of 30-115 rpm.

All three models of Hydraulic Augers are efficient in digging holes. Just let us know your requirements and you will get the equipment at your job place!

 

Hydraulic Power Systems - We will meet all your needs!

At Hydraulic Power Systems we specialize in designing, manufacturing and distribution of piling and deep foundation construction equipment. Our engineers are experienced and skilled in building ergonomic hydraulic equipment for construction, marine, mining and industrial applications.

We have been exceeding our customer expectations with our superior and reliable equipment since 1980. Our design criteria include systems simplicity, durable components and minimized downtime.

Hydraulic Power Systems has the right expertise and flexibility to satisfy all your construction equipment demands. We are one of the most trusted Construction Equipment companies with a worldwide dealer network. 

Let’s plan the win-win strategy for your construction project now! Call us at 816.221.4774 or visit our website - https://hydraulicpowersystems.com/ 

Read More:- Pile Driving Equipment Company Missouri - Hydraulic Power Systems

Read More:- Sheet Pile Driving: How Does it Work?

Read More:- Types of Different Pile driving equipment and their Uses

Hydraulic Augers vs Vibratory Hammer, Which is best and why?

Hydraulic Power Systems offers a range of foundation construction equipment such as Hydraulic Augers, Vibro Hammers, Lead Systems and many others. Our construction machines have been useful to build structures at various construction sites.

We are committed to offering cutting-edge piling and drilling equipment as well as attachments like - vibrators and hammers. Our every equipment has the following characteristics:

Easy to transport and set up

Equipment for foundation work has to be moved from one work site to another. Hydraulic Power Systems foundation equipment are designed for easy assembly and disassembly. Since we offer construction equipment on rent, we make sure that the transportation of the machines is made easy every time.

Environment-friendly

Our equipment is made with the most advanced technology. We make sure that all machines work in harmony with the environment. Also, we ensure that they can be used near residential areas without disturbing your neighbors.

Powerful yet safe

As the building and bridges become larger in size and seismic strengthening projects increase, you will need equipment that are powerful yet safe. Safety features include reliable operation of the equipment in any sort of environment.

Though we offer a variety of construction equipment, the most demanded ones are - Vibratory Hammers and Hydraulic Augers. Many of you may get confused between vibratory hammers and hydraulic augers, however, both of them work differently.

Hydraulic Augers V/s Vibratory Hammer

1. Hydraulic Augers are used to dig holes in the soil, however, Vibratory Hammers are used for driving or extracting piles.

2. Hydraulic Augers make use of the hydraulic pressure for their operation. On the other side, Vibratory Hammers make use of the energy of a large electric motor to operate.

3.  Hydraulic Augers have large drilling rigs while Vibratory Hammers are lightweight and smaller in size.

4. In the Vibratory Hammers, the high-speed vibration causes allow the pile to slip easily into the ground. However, the Hydraulic Augers efficiently dig holes, as opposed to boring holes with a pile driver.

5. Hydraulic Augers come in different models like - Model H-15, Model H35/50Vt and Model H50/70VT, whereas Vibratory Hammers have different types - Caisson hammers, Sheeting Hammers and excavator Mounted Hammers.

6. Hydraulic augers are used more in mining operations to dig holes quickly, however, Vibratory hammers are used to drive piles for the construction of bridges, dams, buildings or any such structures.

Choosing between a Vibratory Hammer and a Hydraulic Auger is not that difficult. If you want to construct new buildings, you will need Vibratory Hammers to drive or extract piles. However, if you want to dig holes quickly and efficiently, a Hydraulic Auger will be the right choice.

At Hydraulic power system, we offer Vibratory Hammers and Hydraulic Augers Rentals in Missouri. We deliver the best quality foundation construction equipment as per your work. All of them are designed and manufactured to provide smooth and quiet performance. We have various models for each type of equipment because our aim is to provide “The Right Equipment for Every Job”. To learn more about us, call us today at 816.221.4774 or visit our website - https://hydraulicpowersystems.com/ 

Read More:- Types of Hydraulic Systems and How it works?

Hydraulic Augers Rentals Missouri Kansas City - Hydraulic Power Systems

Hydraulic Power Systems is one of the best Hydraulic Auger companies in Missouri Kansas City. HPSI rents and sells hydraulic augers in Kansas City and throughout the United States. 

HPSI offers only the highest quality and most valuable augers, which is why they have a 100% customer satisfaction rate. As a result, you can rely on HPSI to meet your needs. For more information, call 816-221-47!

 Read more:- Vibratory hammer dampeners - Hydraulic Power Systems

Hydraulic Pile Driver for your project in Missouri! Hydraulic Power Systems

Are you looking for Hydraulic Pile Drivers for your projects that are high-quality and reliable? Do you want heavy construction equipment at competitive prices? 

Hydraulic Power Systems is the premier choice for construction equipment. We provide customized hydraulic pile driving systems and accessories. 

Tell us what you need and we’ll provide you quality equipment. Call today at 816-221-4774 or visit our website to get the best construction equipment from Hydraulic Power Systems.